Home › Technical Data

How to Set the Rupture Valve

How to set the rupture valve 1 How to set the rupture valve 2

e.g.) As shown in the table, when a 0.75” rupture valve is adjusted, it operates by detecting a flow of +30 l/min per 1 mm.

Turning the rupture valve inward (clockwise) by one full turn (360°) moves it 1.75 mm.

If the 0.75” rupture valve is tightened fully outward (counterclockwise) and then turned inward (clockwise) by one turn, it closes when it detects a flow of 5 + 52.5 = 57.5 l/min.